PTFE EXTRUDED ROD
There are two kinds of PTFE rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; rods Over the diameter 50mm are manufactured by moulding. PTFE is the most chemical-resistant of all known plastics. It does not age.
|PropertiesUnitResultApparent densityg/cm32.10—2.30Tensile strength (min)MPa14.0Ultimate elongation (min)%140|
Note: When the diameter of rod is larger than 16mm.only test Apparent density
Electrical Insulation,seal,Antisticking materials